This is the place to start your practical exploration of sarge.
sarge is a pure-Python library. You should be able to install it using:
pip install sarge
for installing sarge into a virtualenv or other directory where you have write permissions. On Posix platforms, you may need to invoke using sudo if you need to install sarge in a protected location such as your system Python’s site-packages directory.
A full test suite is included with sarge. To run it, you’ll need to unpack a source tarball and run python setup.py test in the top-level directory of the unpack location. You can of course also run python setup.py install to install from the source tarball (perhaps invoking with sudo if you need to install to a protected location).
In the simplest cases, sarge doesn’t provide any major advantage over subprocess:
>>> from sarge import run
>>> run('echo "Hello, world!"')
Hello, world!
<sarge.Pipeline object at 0x1057110>
The echo command got run, as expected, and printed its output on the console. In addition, a Pipeline object got returned. Don’t worry too much about what this is for now - it’s more useful when more complex combinations of commands are run.
By comparison, the analogous case with subprocess would be:
>>> from subprocess import call
>>> call('echo "Hello, world!"'.split())
"Hello, world!"
0
We had to call split() on the command (or we could have passed shell=True), and as well as running the command, the call() method returned the exit code of the subprocess. To get the same effect with sarge you have to do:
>>> from sarge import run
>>> run('echo "Hello, world!"').returncode
Hello, world!
0
If that’s as simple as you want to get, then of course you don’t need sarge. Let’s look at more demanding uses next.
It’s easy to chain commands together with sarge. For example:
>>> run('echo "Hello,"; echo "world!"')
Hello,
world!
<sarge.Pipeline object at 0x247ed50>
whereas this would have been more involved if you were just using subprocess:
>>> call('echo "Hello,"'.split()); call('echo "world!"'.split())
"Hello,"
0
"world!"
0
You get two return codes, one for each command. The same information is available from sarge, in one place - the Pipeline instance that’s returned from a run() call:
>>> run('echo "Hello,"; echo "world!"').returncodes
Hello,
world!
[0, 0]
The returncodes property of a Pipeline instance returns a list of the return codes of all the commands that were run, whereas the returncode property just returns the last element of this list. The Pipeline class defines a number of useful properties - see the reference for full details.
By default, sarge does not run commands via the shell. This means that wildcard characters in user input do not have potentially dangerous consequences:
>>> run('ls *.py')
ls: cannot access *.py: No such file or directory
<sarge.Pipeline object at 0x20f3dd0>
This behaviour helps to avoid shell injection attacks.
If you need to merge commands with external inputs (e.g. user inputs) and you want to prevent shell injection attacks, you can use the shell_format() function. This takes a format string, positional and keyword arguments and uses the new formatting (str.format()) to produce the result:
>>> from sarge import shell_format
>>> shell_format('ls {0}', '*.py')
"ls '*.py'"
Note how the potentially unsafe input has been quoted. With a safe input, no quoting is done:
>>> shell_format('ls {0}', 'test.py')
'ls test.py'
If you really want to prevent quoting, even for potentially unsafe inputs, just use the s conversion:
>>> shell_format('ls {0!s}', '*.py')
'ls *.py'
There is also a shell_quote() function which quotes potentially unsafe input:
>>> from sarge import shell_quote
>>> shell_quote('abc')
'abc'
>>> shell_quote('ab?')
"'ab?'"
>>> shell_quote('"ab?"')
'\'"ab?"\''
>>> shell_quote("'ab?'")
"'ab?'"
This function is used internally by shell_format(), so you shouldn’t need to call it directly except in unusual cases.
You can pass input to a command pipeline using the input keyword parameter to run():
>>> from sarge import run
>>> p = run('cat|cat', input='foo')
foo>>>
You can pass a string, bytes or a file-like object of bytes. If it’s not already, what you pass in is converted to a file-like object of bytes, which is sent to the child process’ stdin stream in a separate thread.
You can use && and || to chain commands conditionally using short-circuit Boolean semantics. For example:
>>> from sarge import run
>>> run('false && echo foo')
<sarge.Pipeline object at 0xb8dd50>
Here, echo foo wasn’t called, because the false command evaluates to False in the shell sense (by returning an exit code other than zero). Conversely:
>>> run('false || echo foo')
foo
<sarge.Pipeline object at 0xa11d50>
Here, foo is output because we used the || condition; because the left- hand operand evaluates to False, the right-hand operand is evaluated (i.e. run, in this context). Similarly, using the true command:
>>> run('true && echo foo')
foo
<sarge.Pipeline object at 0xb8dd50>
>>> run('true || echo foo')
<sarge.Pipeline object at 0xa11d50>
It’s just as easy to construct command pipelines:
>>> run('echo foo | cat')
foo
<sarge.Pipeline object at 0xb8dd50>
>>> run('echo foo; echo bar | cat')
foo
bar
<sarge.Pipeline object at 0xa96c50>
You can also use redirection to files as you might expect. For example:
>>> run('echo foo | cat > /tmp/junk')
<sarge.Pipeline object at 0x24b3190>
^D (to exit Python)
$ cat /tmp/junk
foo
You can use >, >>, 2>, 2>> which all work as on Posix systems. However, you can’t use < or <<.
To send things to the bit-bucket in a cross-platform way, you can do something like:
>>> run('echo foo | cat > %s' % os.devnull)
<sarge.Pipeline object at 0x2765b10>
To capture output for commands, just pass a Capture instance for the relevant stream:
>>> from sarge import run, Capture
>>> p = run('echo foo; echo bar | cat', stdout=Capture())
>>> p.stdout.text
u'foo\nbar\n'
The Capture instance acts like a stream you can read from: it has read(), readline() and readlines() methods which you can call just like on any file-like object, except that they offer additional options through block and timeout keyword parameters.
As in the above example, you can use the bytes or text property of a Capture instance to read all the bytes or text captured. The latter just decodes the former using the default encoding.
There are some convenience functions – capture_stdout(), capture_stderr() and capture_both() – which work just like run() but capture the relevant streams to Capture instances, which can be accessed using the appropriate attribute on the Pipeline instance returned from the functions.
Under the hood, a Capture instance can capture output from one or more sub-process streams, and will create a thread for each such stream so that it can read all sub-process output without causing the sub-processes to block on their output I/O. However, if you use a Capture, you should be prepared either to consume what it’s read from the sub-processes, or else be prepared for it all to be buffered in memory (which may be problematic if the sub-processes generate a lot of output).
You can iterate over Capture instances. By default you will get successive lines from the captured data, as bytes; if you want text, you can wrap with io.TextIOWrapper. Here’s an example using Python 3.2:
>>> from sarge import capture_stdout
>>> p = capture_stdout('echo foo; echo bar')
>>> for line in p.stdout: print(repr(line))
...
b'foo\n'
b'bar\n'
>>> p = capture_stdout('echo bar; echo baz')
>>> from io import TextIOWrapper
>>> for line in TextIOWrapper(p.stdout): print(repr(line))
...
'bar\n'
'baz\n'
This works the same way in Python 2.x. Using Python 2.7:
>>> from sarge import capture_stdout
>>> p = capture_stdout('echo foo; echo bar')
>>> for line in p.stdout: print(repr(line))
...
'foo\n'
'bar\n'
>>> p = capture_stdout('echo bar; echo baz')
>>> from io import TextIOWrapper
>>> for line in TextIOWrapper(p.stdout): print(repr(line))
...
u'bar\n'
u'baz\n'
Sometimes you need to interact with a child process in an interactive manner. To illustrate how to do this, consider the following simple program, named receiver, which will be used as the child process:
#!/usr/bin/env python
import sys
def main(args=None):
while True:
user_input = sys.stdin.readline().strip()
if not user_input:
break
s = 'Hi, %s!\n' % user_input
sys.stdout.write(s)
sys.stdout.flush() # need this when run as a subprocess
if __name__ == '__main__':
sys.exit(main())
This just reads lines from the input and echoes them back as a greeting. If we run it interactively:
$ ./receiver
Fred
Hi, Fred!
Jim
Hi, Jim!
Sheila
Hi, Sheila!
The program exits on seeing an empty line.
We can now show how to interact with this program from a parent process:
>>> from sarge import Command, Capture
>>> from subprocess import PIPE
>>> p = Command('/.receiver', stdout=Capture(buffer_size=1))
>>> p.run(input=PIPE, async=True)
Command('./receiver')
>>> p.stdin.write('Fred\n')
>>> p.stdout.readline()
'Hi, Fred!\n'
>>> p.stdin.write('Jim\n')
>>> p.stdout.readline()
'Hi, Jim!\n'
>>> p.stdin.write('Sheila\n')
>>> p.stdout.readline()
'Hi, Sheila!\n'
>>> p.stdin.write('\n')
>>> p.stdout.readline()
''
>>> p.returncode
>>> p.wait()
0
The p.returncode didn’t print anything, indicating that the return code was None. This means that although the child process has exited, it’s still a zombie because we haven’t “reaped” it by making a call to wait(). Once that’s done, the zombie disappears and we get the return code.
Note that two elements are needed for this example to work:
This example illustrates that in order for this sort of interaction to work, you need cooperation from the child process. If the child process has large output buffers and doesn’t flush them, you could be kept waiting for input until the buffers fill up or a flush occurs.
If a third party package you’re trying to interact with gives you buffering problems, you may or may not have luck (on Posix, at least) using the unbuffer utility from the expect-dev package (do a Web search to find it). This invokes a program directing its output to a pseudo-tty device which gives line buffering behaviour. This doesn’t always work, though :-(
In the subprocess.Popen constructor, the env keyword argument, if supplied, is expected to be the complete environment passed to the child process. This can lead to problems on Windows, where if you don’t pass the SYSTEMROOT environment variable, things can break. With sarge, it’s assumed that anything you pass in env is added to the contents of os.environ. This is almost always what you want - after all, in a Posix shell, the environment is generally inherited with certain additions for a specific command invocation.
You can set the working directory for a Command or Pipeline using the cwd keyword argument to the constructor, which is passed through to the subprocess when it’s created. Likewise, you can use the other keyword arguments which are accepted by the subprocess.Popen constructor.
Avoid using the stdin keyword argument – instead, use the input keyword argument to the Command.run() and Pipeline.run() methods, or the run(), capture_stdout(), capture_stderr(), and capture_both() functions.
All data between your process and sub-processes is communicated as bytes. Any text passed as input to run() or a run() method will be converted to bytes using the default encoding (usually UTF-8).
As sarge requires Python 2.6 or later, you can use from __future__ import unicode_literals and byte literals like b'foo' so that your code looks and behaves the same under Python 2.x and Python 3.x.
As mentioned above, Capture instances return bytes, but you can wrap with io.TextIOWrapper if you want text.
The Capture and Pipeline classes can be used as context managers:
>>> with Capture() as out:
... with Pipeline('cat; echo bar | cat', stdout=out) as p:
... p.run(input='foo\n')
...
<sarge.Pipeline object at 0x7f3320e94310>
>>> out.read().split()
['foo', 'bar']
By default. commands passed to run() run synchronously, i.e. all commands run to completion before the call returns. However, you can pass async=True to run, in which case the call returns a Pipeline instance before all the commands in it have run. You will need to call wait() or close() on this instance when you are ready to synchronise with it; this is needed so that the sub processes can be properly disposed of (otherwise, you will leave zombie processes hanging around, which show up, for example, as <defunct> on Linux systems when you run ps -ef). Here’s an example:
>>> p = run('echo foo|cat|cat|cat|cat', async=True)
>>> foo
Here, foo is printed to the terminal by the last cat command, but all the sub-processes are zombies. (The run function returned immediately, so the interpreter got to issue the >>>` prompt *before* the ``foo output was printed.)
In another terminal, you can see the zombies:
$ ps -ef | grep defunct | grep -v grep
vinay 4219 4217 0 19:27 pts/0 00:00:00 [echo] <defunct>
vinay 4220 4217 0 19:27 pts/0 00:00:00 [cat] <defunct>
vinay 4221 4217 0 19:27 pts/0 00:00:00 [cat] <defunct>
vinay 4222 4217 0 19:27 pts/0 00:00:00 [cat] <defunct>
vinay 4223 4217 0 19:27 pts/0 00:00:00 [cat] <defunct>
Now back in the interactive Python session, we call close() on the pipeline:
>>> p.close()
and now, in the other terminal, look for defunct processes again:
$ ps -ef | grep defunct | grep -v grep
$
No zombies found :-)
If you run commands asynchronously by using & in a command pipeline, then a thread is spawned to run each such command asynchronously. Remember that thread scheduling behaviour can be unexpected – things may not always run in the order you expect. For example, the command line:
echo foo & echo bar & echo baz
should run all of the echo commands concurrently as far as possible, but you can’t be sure of the exact sequence in which these commands complete – it may vary from machine to machine and even from one run to the next. This has nothing to do with sarge - there are no guarantees with just plain Bash, either.
On Posix, subprocess uses os.fork() to create the child process, and you may see dire warnings on the Internet about mixing threads, processes and fork(). It is a heady mix, to be sure: you need to understand what’s going on in order to avoid nasty surprises. If you run into any such, it may be hard to get help because others can’t reproduce the problems. However, that’s no reason to shy away from providing the functionality altogether.
For an exposition of the sort of things which might bite you if you are using locks, threading and fork(), see this post.
Please report any problems you find in this area (or any other) either via the mailing list or the issue tracker.
You might find it helpful to look at information about how sarge works internally – Under the hood – or the API Reference.